L Type Spiders, Solid Centers
LOVEJOY
| Material | Angular Misalignment | Outside Dia. | Color | Max. Parallel Misalignment | Chemical Resistance | Normal Temp. Range | Shore Hardness | Price (inc. GST) |
|---|---|---|---|---|---|---|---|---|
| Hytrel | 0.5° | - | Tan | 0.15" | Excellent | -60°F to +250°F | 55D | SGD 330.78 |
| Hytrel | 0.5° | 1.07" | Tan | 0.15" | Excellent | -60°F to +250°F | 55D | SGD 23.33 |
| Hytrel | 0.5° | 3.31" | Tan | 0.15" | Excellent | -60°F to +250°F | 55D | SGD 173.96 |
| Hytrel | 0.5° | 3 3/4" | Tan | 0.15" | Excellent | -60°F to +250°F | 55D | SGD 239.03 |
| Hytrel | 0.5° | 4 1/2" | Tan | 0.15" | Excellent | -60°F to +250°F | 55D | SGD 281.70 |
| Urethane | 1° | - | Blue | 0.15" | Very Good | -30°F to +160°F | 55D, L050 - L110, 90 - 95A, L150 - L225 | SGD 19.39 |
| SOX Rubber | 1° | - | Black | 3/20" | Good | -40°F to +212°F | 80A | SGD 10.28 |
| SOX Rubber | 1° | - | Black | 3/20" | Good | -40°F to +212°F | 80A | SGD 103.38 |
| SOX Rubber | 1° | - | Black | 0.15" | Good | -40°F to +212°F | 80A | SGD 4.94 |
| SOX Rubber | 1° | - | Black | 0.15" | Good | -40°F to +212°F | 80A | SGD 73.69 |
| Urethane | 1° | 1.07" | Blue | 0.15" | Very Good | -30°F to +160°F | 55D, L050 - L110, 90 - 95A, L150 - L225 | SGD 27.92 |
| SOX Rubber | 1° | 1.07" | Black | 0.15" | Good | -40°F to +212°F | 80A | SGD 13.71 |
| SOX Rubber | 1° | 1 3/4" | Black | 3/20" | Good | -40°F to +212°F | 80A | SGD 21.98 |
| SOX Rubber | 1° | 2 3/25" | Black | 3/20" | Good | -40°F to +212°F | 80A | SGD 7.23 |
| SOX Rubber | 1° | 2 3/25" | Black | 3/20" | Good | -40°F to +212°F | 80A | SGD 7.23 |
| SOX Rubber | 1° | 2 3/25" | Black | 0.15" | Good | -40°F to +212°F | 80A | SGD 10.37 |
| SOX Rubber | 1° | 2 3/25" | Black | 0.15" | Good | -40°F to +212°F | 80A | SGD 40.82 |
| SOX Rubber | 1° | 2 3/25" | Black | 3/20" | Good | -40°F to +212°F | 80A | SGD 5.17 |
| SOX Rubber | 1° | 2 3/25" | Black | 0.15" | Good | -40°F to +212°F | 80A | SGD 17.63 |
| SOX Rubber | 1° | 3.31" | Black | 0.15" | Good | -40°F to +212°F | 80A | SGD 85.86 |
| SOX Rubber | 1° | 3 3/4" | Black | 3/20" | Good | -40°F to +212°F | 80A | SGD 89.62 |
| SOX Rubber | 1° | 4 1/2" | Black | 0.15" | Good | -40°F to +212°F | 80A | SGD 162.35 |
Frequently Asked Questions
What is the primary purpose of the clearance or gap between the key and the keyway?
- The purpose of providing some gap or clearance between the key and the bottom of the hub keyway is to ensure that the hub seats properly on its shaft. In the case of a coupling hub, this clearance causes damage to its internal surfaces as it provides an opening through which corrosive gases or water can enter the coupling easily.
What is the difference between keyway and without keyway hubs?
- A keyed connection ensures a positive stop until failure. On the other hand, if the two mating parts are not assembled correctly or the torque gets exceeded, a keyless connection in hubs could permit slippage between them. Hubs without keyways prevent parallel and angular shaft misalignment.
What is a spider in a coupling?
- Lovejoy jaw couplings are composed of three parts, i.e. an elastomer insert known as a spider and two metallic hubs on both sides. These three separate parts are pressed together with the help of a jaw from each hub, both of which are fitted alternately with the lobes of the spider to form a Lovejoy spider coupling.
Explore More
- JABSCO
- KEYSHAFT
- KINGSCOTE
- THERN
- WHEEL CHECK
- Cut-Off Blades
- Sander Grinder Accessories
- Vapor Tight Fixtures
- Repair Clamps
- Floor Coatings
- SHARPE VALVES Forged Carbon Steel Gate Valve, Socket Weld
- ANSELL 72-400 Hyflex Cut Resistant Gloves
- TYGON 2001 Chemical Resistant Pump Tubings
- ANVIL 49 Series Concrete Clevis Plates
- ANVIL AS604 Series 2-Hole Corner Angle
- KNIPEX Insulated Dismantling Cutter
- BESSEY Rapid-Action Lever Bar Clamps
- STARRETT 3732 Series Electronic Micrometers Without Output
- MILWAUKEE Impact Socket Extensions