Oetiker 14100396 | HIP1000396 | 4E607 | Straight Nose Jaw Pincer, Large Insulated Handle Grips

Q: Can Oetiker clamps be reused after removal?

Selected Oetiker clamps, such as low profile, universal &amp; screw clamps, can be reused after removing them from hoses. However, ear clamps can't be reused once cut &amp; removed.

Specifications

Item	Ratchet Pincer
Application	Ear Clamps
Band Material	Forged Steel
Body Material	Forged Steel
Clamping Force	1000N
Crimper Style	Ear Clamp
Crimping Capacity	3/8", 1/2", 5/8", 3/4", 1"
Height	21 mm
Jaw Style	Standard

Jaw Width	20 mm
Length	225 mm
Max. Ear Width	13 mm
Maximum Crimping Force	530 lbs.
Opening Gap Top	25.5 mm
Overall Length	8 3/4"
Pack Size	1
Use With	105 Series, 151 Series, 153 Series, 154 Series, 155 Series, 159 Series, 163 Series, 167 Series, 109 Series, 113 Series, 123 Series, 196 Series, 117 Series
Width	50 mm

Shipping Information

Height (cm)	2.1
Length (cm)	22.54
Width (cm)	4.98

HS Code	8203206060
Country Of Origin	DE
Weight (kg)	0.3375

Uses

Oetiker 14100396 straight jaw pincer is ideal for clamping or removing ear clamps from hoses in agricultural, automobile, heating & cooling applications. This Oetiker 14100396 jaw pincer also provides a leak-free operation without damaging the ear clamp due to exerting high clamping force.

Working Mechanism

Steps for installing ear clamps using Oetiker 14100396 standard jaw pincer are:

Select a right sized ear clamp according to the hose diameter.
Slip the ear clamp over the hose and position it toward the end of the hose.Keep approximately 1/4 inch space between the clamp and the end of the hose.
Hold the clamp around its ear using Oetiker 14100396 pincer and apply enough pressure to ensure crimping of clamp ear & a tight assembly.
Users should apply closing force at once through this Oetiker 14100396 single action pincer. Repeated application of crimping force could damage the ear clamp.

Steps for removing ear clamps from a hose using Oetiker 14100396 straight jaw pincer are:

Place the Oetiker 14100396 straight jaw pincer under the clamp ear.
Apply enough force to cut the clamp ear & remove the clamp from the hose.
Adjustable ear clamps with outer mechanical interlock are further easier to remove than normal ear clamps. Just peel away one end of the clamp from the mechanical interlock using Oetiker 14100396 pincer & remove the clamp from the hose.

Features

Oetiker 14100396 jaw pincer is suitable for installation and replacement of ear clamps in hydraulic, coolant & fluid line and automotive applications.
It has forged steel construction for high impact strength, durability and withstanding harsh industrial abuse.
Oetiker 14100396 is equipped with large, insulated handle grips for user comfort and protection against electrical hazards.
It has straight jaws for removing clamps that provide unrestricted radial access to the clamp ear.
Oetiker 14100396 pincers provide effective single action closure due to consistent ratio between hand force and jaw tip force.
Raptor Supplies also offers hose clamp kits with an assortment of ear clamps and a jaw pincer for use in hydraulic & cooling line, oil & gas, plumbing and maintenance operations.

Compatible Accessories

Ear clamps: Oetiker 14100396 straight jaw pincer is suitable for use with both single ear (153, 154, 105, 155, 159, 163 and 167 Series) and double ear (101 and 151 Series) Oetiker ear clamp variants.

Standards and Approvals

Oetiker 14100396 straight jaw pincer has been assessed to meet the requirements of IATF 16949:2016 and is ISO 9001:2015 certified for ensuring environmental health & superior clamp performance.

Installation

Oetiker 14100396 straight jaw pincer comes fully assembled & pre-adjusted as a single unit from the factory for direct usage.
Oetiker 14100396 may need lubrication and readjustment if used after a long period.

Frequently Asked Questions

Q.What is the difference between ratchet pinchers and standard jaw pincers?

Ratchet pinchers are angled at 90 degrees to the ear clamps with its jaws clamping both sides of the ferrule, compressing the hose against the barbed portion of the hose fittings for a secure fit. On the other hand, Oetiker side or narrow (standard) jaw pincers serve as the right fit for applications having limited operating space.

Are other variants of Oetiker 14100396 jaw pincer available on Raptor Supplies?

Yes, Raptor Supplies also offers jaw pincers in a variant having side jaws ( Oetiker 14100446 pincer) that act perpendicularly to the ear clamp for use in applications where the radial area is very limited.

What are the points to consider for operating Oetiker 14100396 jaw pincer?

Oetiker 14100396 straight jaw pincers do not provide the same closure force each time due to its inherent applied force variability. The actual pincer force depends on various factors, such as applied hand force, local worker safety limits and specific application properties. It is possible to exceed the maximum closure force of a particular ear clamp. However, it must ensure worker safety and the final connection integrity of that ear clamp.

What are the types of clamps that Oetikar offers?

Oetiker offers a wide range of hose clamps, such as screw, ear, spring, wire, worm and plastic clamps.

How do users remove Oetiker clamps?

Customers can use tools, such as a side or bowl nose cutter, to remove the interlock & peel back the clamps from hoses. It is not recommended to use rotating cutters as they can cause damage to the hose while cutting the clamp.

Can Oetiker clamps be reused after removal?

Selected Oetiker clamps, such as low profile, universal & screw clamps, can be reused after removing them from hoses. However, ear clamps can't be reused once cut & removed.

OETIKER 14100396 HIP1000396 Straight Nose Jaw Pincer, Large Insulated Handle Grips